Many home solar users can see inverter generation, but still cannot explain the utility bill. The missing data is usually on the grid side: import, export, and real self-consumption.
IAMMETER fills that gap with a low-cost monitoring solution that works with any inverter. Monitor both grid interaction and inverter generation, see your self-use rate clearly, and find where more bill savings are possible.
This is the most common residential solar complaint. The panels and inverter seem to work, but the homeowner still does not know whether the generated energy is being used well.
The inverter platform reports production, but not the full energy flow of the house.
Users cannot see when they still buy power from the utility, especially outside peak solar hours.
Some inverter ecosystems require approved accessories or meters that cost too much for simple residential monitoring.
Without direct visibility into self-use, it is difficult to know how much solar is truly reducing the bill.
IAMMETER does not depend on inverter brand integration to explain home solar performance. It measures actual energy flow with meters placed on the grid side and inverter side.
That means residential users can finally see generation, import, export, and self-consumption together. Instead of guessing why the bill is still high, they can identify exactly when solar is used locally and when it is not.
Demo behavior: mobile browser opens an app-style interface, while desktop browser opens the full IAMMETER-Cloud dashboard.
A practical path to complete home solar monitoring can stay under the typical cost of vendor-specific metering accessories.
IAMMETER reads real energy flow directly, so the solution is not locked to a particular inverter ecosystem.
The system monitors the two points that matter most for residential solar economics: the grid side and the inverter side.
Users can quickly see whether solar is consumed in the home or sent away at lower value.
Once the user sees when power is exported and when imports still happen, it becomes much easier to shift loads, improve self-consumption, and maximize the financial return of the solar installation.
See a practical optimization exampleThe final step is straightforward: choose the meter based on the residential wiring topology. IAMMETER then delivers the complete monitoring view needed to understand real savings performance.
WEM2067 is the practical meter for single-phase grid + single-phase inverter systems. It gives residential users a low-cost path to monitor both the grid side and inverter generation in one setup.
WEM3050T is the recommended meter for split-phase grid + split-phase inverter systems. It is especially suitable for North American residential solar users who need complete monitoring without a high accessory cost.
Because generation alone does not explain how much solar was used at home. You also need to monitor grid import, grid export, and self-consumption to understand real bill savings.
Yes. IAMMETER measures actual electrical energy flow with its own meter, so it does not rely on a specific inverter brand for monitoring compatibility.
Yes. By monitoring both the grid side and inverter side, IAMMETER helps reveal how much generated solar is used directly in the home.
For a single-phase home solar system, choose WEM2067. For a split-phase home solar system, choose WEM3050T.
Yes. IAMMETER supports Home Assistant, local API, MQTT, Modbus/TCP, and other flexible integrations for users who want more than cloud-only monitoring.
Stop relying on generation alone. Add affordable monitoring for grid and inverter, understand self-consumption, and get more real savings from your solar system.
Looking for more energy solutions?