Please refer to Tutorial Video for hardware installation guidance.
Wiring in a Single Phase Solar System
Note: The break for the meter is optional. You can connect the meter directly to the main breaker or without the breaker.
Wiring in a Single Phase Residential Electricity System
Wiring in a Three Phase Residential Electricity System
Step1, scan the QR code and download the mobile app
Step 2, search and connect the iMeter's access point signal iMeter_xxxxxxxx by your phone
Step 3, Open app and find the iMeter
Tips: If the app prompts "Invalid device version", you need to setup the WiFi network by browser. Same as 3.3 WEM3162T QuickStart
Step 4, Select the SSID of your home WiFi network;
Step 5, Enter password and save. After succesfully configure the WiFi settings, you will see that the IP address allocated for the iMeter.
Tips: SN is the unique Serial Number of your iMeter. You can copy it from the iMeter's access point signal (iMeter_xxxxxxxx, xxxxxxxx is the SN).
Tips: Time zone must be set according to where your meter located for correct data display and report on time basis.
Tips: It is "single phase" as default meter type in Iammeter system. You need to change the meter "Type" as "Three Phase"
Tips: Please set the use type of each CT according to the actual CT installation. For example, if you clamp the CT of phase A onto grid, then you set its use type as "grid".
Tips: Please visit https://www.iammeter.com to login to the web portal. Same username and password as app. You can see more analysis report on web.
If you have a WeChat account, please follow our IAMMETER WeChat public ID.
Leave a comment