Sorry, your browser does not support JavaScript!

Firmware Upgrade

1 Introduction

Sometimes, you need to upgrade the firmware of iMeter to get the latest function. Ask for latest firmware by sending email to steven.lu@devicebit.com or support@devicebit.com.

2 Firmware Upgrade

Step1, go to iMeter configuration webpage by below steps WiFi Setup

  1. Use your smart device's Wi-Fi connection setup, connect to the iMeter's network, which will show up as iMeter_xxxxxxxx. No password required.

  2. Whilst connected to the iMeter's network, open a web browser and navigate to http://11.11.11.1; Enter the username "admin" and password "admin".

  3. Now you already enter the configuration webpage.

Step2, go to "System" tab page, and click "choose file" to select the firmware file. firmware upgrade Step3, click "upload' and the below picture shows the successful upgrade of firmware. You can go to "system" tab page again to check the version (same with the file name of firmware). upgrade success

Note

If you have a WeChat account, please follow our IAMMETER WeChat public ID.

iammeter.jpg

Top